Load data for .308 Marlin Express + .308 | 130gr | Impala LWHV LS

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 130gr \| Impala LWHV LS
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.268" \| 32.2mm
Caliber:	.308 Marlin Express load data
Case Length (l3):	1.910" \| 48.5mm
Cartridge Length (C.O.L.):	2.571" \| 65.3mm
Seated Depth:	0.607" \| 15.4mm
Shank Seated Depth:	0.607" \| 15.4mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	47863 psi \| 3300 bar
LID:	LID_B2985_C397
Last updated:	2025-01-01

Load data for 74 loads in caliber .308 Marlin Express with .308 | 130gr | Impala LWHV LS bullet and 37 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	42844	90%	**15	100%
ADI AR 2219	<<locked>>	91%	42946	90%	**57	96%
Accurate 2015	<<locked>>	96%	42366	89%	**18	98%
[Accurate 2460]*	<<locked>>	94%	42308	88%	**21	93%
Accurate 2495	<<locked>>	96%	34606	72%	**66	96%
[Accurate 2520]*	<<locked>>	96%	36840	77%	**66	92%
Alliant AR-Comp 👍	<<locked>>	97%	37956	79%	**12	99%
Alliant Reloder-10x 👍	<<locked>>	93%	42540	89%	**41	99%
Alliant Reloder-7	<<locked>>	85%	42554	89%	**72	99%
Baschieri & Pellagri 106	<<locked>>	90%	42366	89%	**46	97%
[Hodgdon Benchmark]*	<<locked>>	95%	42134	88%	**59	92%
[Hodgdon CFE BLK]*	<<locked>>	86%	42540	89%	**20	91%
Hodgdon H322	<<locked>>	97%	42946	90%	**57	96%
Hodgdon H335	<<locked>>	91%	42482	89%	**51	95%
Hodgdon H4198	<<locked>>	87%	42989	90%	**43	96%
[IMR 3031]*	<<locked>>	96%	33141	69%	**93	94%
IMR 4198 👍	<<locked>>	91%	42801	89%	**95	100%
[Lovex D073.4]*	<<locked>>	93%	42221	88%	**02	93%
[Lovex D073.5]*	<<locked>>	95%	42786	89%	**31	93%
Norma 200 👍	<<locked>>	89%	42757	89%	**28	99%
[Norma 202]*	<<locked>>	96%	36347	76%	**33	93%
[ReloadSwiss RS 40]*	<<locked>>	93%	42221	88%	**15	94%
[Rottweil R 901]*	<<locked>>	96%	40799	85%	**82	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	42728	89%	**72	100%
SNPE Vectan SP 10	<<locked>>	91%	42975	90%	**54	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	40074	84%	**07	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	32445	68%	**52	92%
[Somchem S321]*	<<locked>>	96%	42424	89%	**44	92%
Somchem S335	<<locked>>	96%	38914	81%	**20	95%
Vihtavuori N120	<<locked>>	89%	42656	89%	**66	100%
Vihtavuori N130	<<locked>>	95%	42090	88%	**69	99%
Vihtavuori N133	<<locked>>	97%	36724	77%	**74	96%
[Vihtavuori N135]*	<<locked>>	96%	27644	58%	**13	92%
[Vihtavuori N140]*	<<locked>>	97%	34838	73%	**67	93%
[Vihtavuori N530]*	<<locked>>	96%	42598	89%	**31	92%
[Vihtavuori N540]*	<<locked>>	96%	33997	71%	**70	92%
[Winchester 748]*	<<locked>>	97%	43047	90%	**71	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	35679	75%	**77	100%
[ADI AR 2219]*	<<locked>>	81%	31589	66%	**98	92%
[Accurate 2015]*	<<locked>>	81%	26934	56%	**67	93%
[Accurate 2460]*	<<locked>>	89%	35563	74%	**80	90%
[Accurate 2495]*	<<locked>>	83%	22568	47%	**31	90%
[Accurate 2520]*	<<locked>>	93%	33359	70%	**87	91%
[Alliant AR-Comp]*	<<locked>>	81%	24279	51%	**28	93%
Alliant Reloder-10x	<<locked>>	81%	30081	63%	**69	96%
Alliant Reloder-7	<<locked>>	81%	37304	78%	**70	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	32489	68%	**36	94%
[Hodgdon Benchmark]*	<<locked>>	90%	36405	76%	**41	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	38783	81%	**44	90%
[Hodgdon H322]*	<<locked>>	83%	28718	60%	**16	90%
[Hodgdon H335]*	<<locked>>	81%	30792	64%	**82	90%
[Hodgdon H4198]*	<<locked>>	81%	35897	75%	**95	94%
[IMR 3031]*	<<locked>>	89%	26992	56%	**16	90%
IMR 4198	<<locked>>	81%	32285	67%	**69	97%
[Lovex D073.4]*	<<locked>>	87%	35259	74%	**57	90%
[Lovex D073.5]*	<<locked>>	89%	34824	73%	**70	90%
Norma 200	<<locked>>	81%	33736	70%	**41	98%
[Norma 202]*	<<locked>>	89%	29994	63%	**72	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	33359	70%	**21	90%
[Rottweil R 901]*	<<locked>>	85%	30400	64%	**43	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	39552	83%	**16	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	31879	67%	**11	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	86%	29979	63%	**83	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	28558	60%	**54	90%
[Somchem S321]*	<<locked>>	92%	37782	79%	**46	90%
[Somchem S335]*	<<locked>>	84%	27586	58%	**44	90%
Vihtavuori N120	<<locked>>	81%	33750	71%	**98	100%
Vihtavuori N130	<<locked>>	81%	28558	60%	**74	95%
[Vihtavuori N133]*	<<locked>>	81%	23989	50%	**29	90%
[Vihtavuori N135]*	<<locked>>	93%	25686	54%	**51	90%
[Vihtavuori N140]*	<<locked>>	91%	30037	63%	**43	90%
[Vihtavuori N530]*	<<locked>>	93%	38479	80%	**49	90%
[Vihtavuori N540]*	<<locked>>	94%	31749	66%	**11	90%
[Winchester 748]*	<<locked>>	92%	36912	77%	**43	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data